Install The Battery Pack; Remove The Battery Pack; Operation; Cold Weather Operation - GreenWorks Pro ultrapower 60v SS60L00 Manual Del Operador

7.4

INSTALL THE BATTERY PACK

9
1
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack (10) with the
grooves in the battery compartment (1).
2. Push the battery pack into the battery compartment (1)
until the battery pack (10) locks into place.
3. When you hear a click, the battery pack is installed.
7.5

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack (10) from the machine.
8

OPERATION

WARNING
Wear eye protection during operation.
8.1

COLD WEATHER OPERATION

The safe battery operation temperature ranges from 1°F
(-17°C) to 113°F (45°C).
WARNING
Do not store or charge battery outside.
Battery must be charged and stored indoors prior to use of the
machine.
If the machine does not start:
10
English
• remove the battery pack from the machine,
• charge the battery pack to 15 minutes in warm area, or
when the charging light turns green.
• Install the battery pack back in the unit.
8.2

START THE MACHINE

1. Push and hold the lock-out button (2).
2. Pull the trigger (3) to start the machine.
3. Release the lock-out button (2).
Examine the work area. Remove all stones, sticks, wire,
bones, and other debris that can ricochet because of the
rotating impeller.
If it is possible, clear the snow in the direction of the wind.
8.3

STOP THE MACHINE

1. Release the trigger (3) to stop the machine.
8.4

OPERATE THE MACHINE

1. Start the machine.
2. Push the machine forward until it rides on the scraper.
9
3
2
WARNING
NOTE
EN