ardistel MOTIONSENSE+ Manual De Instrucciones página 7

EN
CONTROLLERS PACK MOTIONSENSE+ FOR Wii™ & Wii U™
INSTRUCTIONS MANUAL
1. REMOTE CONTROLLER WITH MOTIONSENSE+
TECHNICAL SPECIFICATIONS
- Wireless Remote Controller compatible with Add-On Controller and with Nunchuk™* Controller
from Nintendo®.
- Additional MotionSense+ motion sensor device built-in compatible with MotionPlus™
features.
- Included directional pad and buttons 1/2/+/-/A/B/POWER/HOME.
- Voltage: 2.2V ~ 3.2V - Current: 30mA. Connection range: 3-6 m. approx.
NOTE: NEVER CONNECT the Wii™ MotionPlus™* device to the Remote Controller
because both controllers may not function properly. A device with MotionPlus™
compatible features is already built-in.
SETUP
1. Insert the wrist strap (included) in the Remote Controller.
2. Open the battery compartment and place inside 2 AA LR6 1.5V type batteries (not included).
You can see the correct polarity diagram inside the compartment; please respect always their
polarity when inserting the batteries.
3. Press the red SYNC button on your Wii™ system console.
4. Then, press the red SYNC button on the Remote Controller. The blue LED indicators in the
Remote Controller will flash during the SYNC process.
5. Place the cover carefully on the battery compartment.
6. Once the SYNC process is finished, the LED indicators will stop flashing and the LED indicator
that remains on will indicate the player number (from 1 to 4). Depending on the number of
simultaneous controllers linked with the system console, will be one or another.
7. The Remote Controller is set up and ready for use.
NOTE: After the SYNC process, if the Remote MotionSense+ Controller doesn't work properly,
please make sure that it has been assigned as player number 1, because if there is more than one
controller SYNC'd at the same time, the system console will respond only to controller number 1
in most cases. If the Remote MotionSense+ Controller is not assigned as player 1, disconnect
your original WiiMote™ controllers or re-assign the player numbers in the controllers, browsing
into the system main menu and following the on-screen instructions.
FEATURES
- The Remote Controller has a built-in sensor compatible with Wii™ Sensor Bar*, in a connection
range between 3-6 metres (approx).
- Featuring a MotionSense+ device built-in, an additional motion sensor device that features the
same functions than the MotionPlus™* device from Nintendo®.
- Also it has vibration motor and speaker for a more realistic game experience, including battery
energy status pressing A button.
7