Maintenance - Shark NV42 Manual De Instrucciones

Maintenance

Resetting the Motor Thermostat
Your Shark Upright Vacuum is
®
equipped with a protective Motor
Thermostat. If the motor should
overheat, the thermostat shuts off
the power.
To reset the Motor Thermostat:
Move the Power Button to the
"O – Off" position.
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter.
Refer to Checking for Blockages
on page 11.
12 TOLL FREE: 1-800-798-7398
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the
"I – On" position to start the
vacuum.
Note: if vacuum still does not start,
contact Customer Service at:
1-800-798-7398.
Ordering Replacement Parts
To order additional parts and
accessories, go to
www.sharkclean.com
or call 1-800-798-7398.
PART
Super Stretch Hose
Dusting Brush &
Crevice Tool
Foam & Felt Filters
Pet Upholstery Tool
Cleaning Wand
PART NO.
152FFJ
1115-FC
XFF36
261FFJ46
1116-FC