APF PacMAGIC Serie Manual De Instrucciones página 27

1. INTRODUCTION
We kindly request the client or installer to read this manual carefully in order to:
Be familiar with all the potentialities of the unit and to take into account all the necessary circumstances for
IT IS SUGGESTED TO TAKE NOTE OF THE FOLLOWING DATA IN ORDER TO
CONTACT WITH THE AFTER SALES SERVICE
INSTALLATION COMPANY
DATE
TELEPHONE
MODEL
CODE
SERIAL NUMBER
2. ADDITIONAL RECOMMENDATIONS.
A. Installation and maintenance
• Heat sources • Flammable materials • Building air intakes
- During the annual maintenance revision of circuit water tightness according to regulations, verify that the high-pressure and low-pressure
controllers are properly connected to the refrigeration circuit and that they switch off the electrical circuit in case of failure.
- Once a year, before starting to use your haet pump again, check the electrical connections of the electrical components. Do this with the heat
pump disconnected from the power supply.
- In the event of any manipulation or intervention on the refrigeration circuit, it is obligatory to switch off the unit and wait several minutes before
puncturing pressure gauges or measuring temperatures. Some elements such as the compressor and pipes can reach high temperatures and high
pressures that can lead to important burns.
IMPORTANT
Complete a correct installation and start-up.
its correct and lasting operation.
NS
Pressure Equipment Directive (PED-97/23/EC)
PacMAGIC HEAT PUMP