Using The Thermostat - Orbegozo RO 720 Manual De Instrucciones

RO 720 RO 1020 RO 1220
SETUP
Do not start using the radiator until the base is completely fitted.
a. To fix the front support base, fit it tightly against the bottom of the front panel
b. To fix the back support base, fit it tightly against the last fin.
c. After fixing the supports, confirm that the heater is stable on the floor.
OPERATING INSTRUCTIONS
Place the heater on the floor at least 90 cm away from the wall and any other objects such as furniture,
curtains or plants.
With the power switch in the OFF position, plug in the heater. Switch in the LOW position for heating.

USING THE THERMOSTAT

The thermostat will automatically maintain your desired room temperature.
- Turn the thermostat control clockwise all the way round until you hear a "click", this sounds indicates
that the heater is activated, the pilot lights is ON. Continue turning the thermostat clockwise to its
highest setting.
- When the pilot light is ON, the heater is activated.
- Turning the thermostat clockwise will always increase the set temperature. Turning it anticlockwise
will decrease the set temperature. The thermostat will automatically turn the heater on and off.
15