Taurus BERGEN 16C Manual De Instrucciones página 10

- To assemble the base, place the appliance
face down.
- Position the base on the body of the appliance
using the screw provided (Fig.2).
ASSEMBLING THE GRILL AND THE
PROPELLER:
- Fit the rear grill (E) on the motor housing (G),
matching their fitting points.
- Tight the grill nut (D) that attaches the grill,
Make sure of a correct setting.
- Fit the propeller (C) On the motor shaft.
- Tight the nut (B) that attaches the propeller,
Make sure of a correct setting.
- Check the correct rotation of the propeller.
- Fit the front grill (A) front the rear grill (E),
matching the security screw position. Fix the
front grill turning around its fixing belt and tight
the security screw by using a screwdriver.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
USE:
- Unroll the cable completely before plugging it
in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using one of the
speed selection buttons.
- Select the desired speed.
TIMER FUNCTION:
- The appliance's operating time can be con-
trolled.
- To program the operating time simply select it
using the (F) button.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (F) switch.
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
HEIGHT ADJUSTMENT
- The appliance height can be adjusted, it's just
necessary to unlock the knob (K) place the
appliance at the desired height and lock again
the knob (K).
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
selector control.
- Unplug the appliance from the mains.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper part
of the body, which facilitates comfortable trans-
portation (Fig.3).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE