SKYTRONIC DUAL LED TWISTER Manual De Instrucciones página 2

Please read this user manual before using this product.
Warning:
- Read the manual prior to using the unit.
- Keep the manual for further reference.
- Keep the packaging so that you can transport the unit
in its original packaging in order to avoid damage.
- The SkyTec light effect contains a high light intensity
LED. Do not look into the LED's. This might damage
seriously your eyes.
- For indoor use only.
- Don't cover any ventilation opening.
- Do not shake the device and avoid brute force when
installing or operating the device.
- During installation, nobody should stand beneath the
mounting area.
- Installation point/area must be enough for loading 10
times the device's weight.
- The light effect must be placed at least 50 cm away
from inflammable materials such as curtains, books,
etc. Make sure that the housing cannot be touched by
accident.
- Prior to the first use, have the unit checked by a
qualified person.
- The unit contains voltage carrying parts. DO NOT
open the light effect.
- Unplug the unit from the mains prior to repairs,
maintenance and replacement of the lamp.
- Never plug or unplug the unit with wet hands.
- Disconnect the unit from the mains prior to replacing
the fuse.
- If the plug and/or mains lead are damaged, they need
to be repaired by a qualified technician.
UK
- If the unit is damaged to an extent that you can see
internal parts, do not plug the unit into a mains outlet.
- Repairs has to be carried out by a qualified technician.
- Only connect this unit to an earthed mains outlet of
230Vac/50Hz~.
- Always unplug the unit during a thunderstorm or when it
is not in use.
- If the unit has not been used for a longer period of time,
condensation can occur inside the housing. Please let
the unit reach room temperature prior to use.
- When you unplug the unit from the mains always pull the
plug, never the lead.
- In order to prevent dropping of the unit, a safety
fastening needs to be installed. This can be a solid chain,
a steel cable, etc. which has to be fastened separately
from the mounting bracket.
- Use only certificated safety cables which can hold 12
times the weight of the device.
- The maximum drop distance must never exceed 20cm.
- The supplied bracket is the main fixing and must be used
to solidly mount the light effect.
- In order to avoid accidents in public premises, the local
legal requirements and safety regulations/warnings must
be fulfilled.
- Keep out of the reach of children.
- Never leave this device running unattended.
- The operator has to make sure that safery relating and
machine technical installations are approved by a skilled
person regular.