Insertion Of Batteries - LaserLiner MultiMeter-Pocket Manual De Instrucciones

Insertion of batteries

1
Attaching the test prods
2
In order to avoid the risk of injury, the test prods must always be kept
in the holder on the rear of the meter when not in use and during
transport.
Voltage measurement DC/AC
3
To take a voltage measurement, turn the
rotary switch to position „V" and press
the „Mode" button to set the voltage
mode (AC, DC). Then connect the
measuring contacts to the object to be
tested. The measured value acquired and
the polarity appear on the display.
MultiMeter-Pocket
2 x 1.5 V type AAA NEDA24A/IEC LR 03
black
GB
red
13