Cleaning And Maintenance - HJM 618 Instrucciones De Uso

fixed in this way will be automatically regulated and kept at a constant level
by the thermostat.

CLEANING AND MAINTENANCE

Before cleaning always remove the plug from the electrical socket.
Clean the air inlet / outlet grilles frequently.
Never use abrasive powders or solvents.
WARNINGS
- Do not use the appliance in the vicinity of showers, bath tubs, wash
basins, swimming pools, etc.
- Always use the heater in an upright position.
- Do not use the heater to dry your laundry. Never obstruct the intake
and outlet grilles (danger of overheating).
- The heater must be positioned at least 50 cm from furniture or other
objects.
- When the appliance is used in portable version, do not place it up
against walls, furniture, furniture, curtains, etc.
- The appliance must be installed so that the switches and other controls
can not be reached by persons using the bath tub or the shower.
- This appliance comes with a Y-type connection. Replacement of the
feed cable must be entrusted only a technician authorized by the
manufacturer, because such work requires special tools.
- The appliance must not be positioned directly underneath a fixed
power point.
- Do not use the appliance while it is functioning in order to avoid
overheating with the attendant risk of fire.
- Do not use the appliance in rooms less than 4m
The heater is fitted with a safety device which will switch off the heater in
case of accidental overheating (e.g. obstruction of air intake and outlet
grilles, motor turning slowly or not at all). To reset, disconnect the plug
from the power for a few minutes, remove the cause of overheating then
plug the appliance in again.
2
area.
- 15 -