LaserLiner DigiLevel Plus Manual De Instrucciones página 5

Completely read through the operating instructions, the „Warranty and
! Additional Information" booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
Function / application
Digital electronic spirit level
– Horizontal and vertical angle display
– The slope memory allows angles to be easily transferred.
General safety instructions
– The device must only be used in accordance with its intended purpose and within
the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery
charge is weak.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or
in the vicinity of people with pacemakers – may apply. Electronic devices can
potentially cause hazards or interference or be subject to hazards or interference.
1
2
3
14
17
15
7 8 9 10 11
DigiLevel Plus
12
1 Change units of measure
2
Angle reference value setting
3
Calibration
4 ON/OFF button
5 Hold function
16
6 Acoustic signal generator /
Backlighting ON/OFF
17
7 Slope direction
8
Acoustic signal generator active
9 HOLD: current measured
value is held
10 Angle reference set
18
11 Battery charge
12 Slope angle
13 Units of measure
14 Horizontal vial
15 Vertical vial
16 Magnets
16
17 Measuring surface
18 Battery compartment (Rear)
DigiLevel Plus
13
4
5
6
05
EN