LaserLiner MultiClamp-Meter Pro Manual De Instrucciones página 16

4 True RMS (ACA / ACV)
u
+Û
1
3
0
4
-Û
5 DC current measurements
1.
1. Turn the rotary switch to position „200A DC" and press
and hold the „MAX/MIN" button for 2 seconds to reset
the device.
2. Place the Current clamp around a line.
3. The measured value is shown on the LC display. By pressing
the „MAX/MIN" button, the minimum and maximum values
are measured and displayed.
6 AC/DC voltage measurements
1.
Red
Black
1. Connect the red test prod to the V
the black test prod to the COM input socket (8).
2. Turn the rotary switch to position „V AC/DC".
The device displays the „AC" voltage mode. Press the
„MAX/MIN" button and hold it down for 2 seconds to
measure the DC voltage.
3. Connect the measuring contacts to the object to be tested.
16
GB
When measuring AC voltage/current,
the device displays the true RMS value
regardless of the wave form.
2
t
1 Peak value
2 Peak-to-peak value
3
RMS value
4
Cycle duration
2.
correct
2.
incorrect
3.
Black
input socket (12) and
Red