Inserting Battery - LaserLiner ClimaPilot Manual De Instrucciones

Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. This document must be kept in a
safe place and passed on together with the device.
Function / Application
The device is used to measure relative humidity and ambient
temperature and to display the calculated dew point. Humidity
and temperatures are measured by means of high-speed sensors
integrated in the tip of the probe. Thanks to its low power con-
sumption, the device can also be used for long-term measurements.
The integrated min/max function allows the lowest and highest
measured values to be shown.
1
1
Sensor
2 LC display
3 Toggle measurement
in °C / °F
Toggle temperature /
dew point display
4 Switch on MAX/MIN values
5
On/off button (rear)
6 Battery compartment
(rear)
1

Inserting battery

Open the battery compartment and insert battery according
to the symbols. Be sure to pay attention to polarity.
2
MAX MIN
5
1
3
°F °C RH
%
a b
MAX MIN
a Display of MAX values
b Display of MIN values
c Measurement in °F
d
Measurement in °C
e Relative humidity in %rH
f Room temperature /
dew point display
1x LR44 button cell
2
ClimaPilot
4
6
c d
°F °C RH
f
EN
e
%
3
05