LaserLiner CableChecker Manual De Instrucciones página 14

5 6 5
To locate TV cables
Connect the TV-coax adapter (6) to a TV socket.
Then use the receiver to search for the line, with the test mode
button (14) held down.
To avoid interference, disconnect the building TV service.
!
TV sockets in particular may contain filters that have
a negative effect on measurements. In this case,
remove the TV socket and perform the measurement
directly at the cable.
6
To locate telephone cables
Connect the RJ 11 adapter (10) to a telephone socket.
Then use the receiver to search for the line, with the test mode
button (14) held down.
!
To avoid interference, disconnect the building
telephone service.
Technical data
Transmitter TX / Receiver RECV
Signal
Max. input voltage
Max. rel. humidity
Operating temperature
Storage temperature
Transmitter TX
Max. output current
Max. signal voltage
Max. testing length
Power supply
Dimensions
Weight (incl. batteries)
Receiver RECV
Max. output current
SCAN mode measuring range
Power supply
Dimensions
Weight (incl. batteries)
Subject to technical alterations 01.16
14
GB
Multi-frequency pulse
20 V DC
< 85% rH non-condensing
-10°C...40°C
-10°C...50°C
10 mA
8 Vss (peak-to-peak)
100 m
2 x 1,5 V type AAA
80 x 152 x 46 mm
185 g
30 mA
0 - 5 cm measuring depth
4 x LR44 1,5 V button cells
26 x 148 x 17 mm
45 g