Proline Chocr Manual De Instrucciones página 5

OVERVIEW
Triangular point
where spiral drive fits
Spiral Drive
PREPARATION
1. Before use wipe the bowl with a damp cloth. Rinse the tier system and spiral drive in
warm water and thoroughly dry.
2. Fit the spiral drive to the triangular point in the centre of the bowl, making sure it is firmly
locked in position.
3. Assemble the tier system by slipping the 2nd and 1st tier over the central column and
then place the top cover on top.
4. Slip the tier system over the spiral drive and lock it in position on the three round pins in
the bowl.
5. Place the fountain on a flat, stable surface.
6. Plug the chocolate fountain into the mains power supply.
7. Turn the function dial to "Start" and allow to pre-heat for about 5 minutes
(without chocolate).
Base unit
Tier System
Centre column
Bowl
Round pins for locking
the tier system
Function dial with Off/
Start/Fountain settings
Top cover
1st tier
2nd tier