Handling And Transport; Type Of Fuel; Important; Preparing The Place Of Installation - Royal Betty 3,5 Manual De Instrucciones Para El Instalador Y El Usuario

3 HANDLING AND
TRANSPORT
It is advisable to wait until the stove arrives at the
place where it will be installed before unpacking it.
The stove is supplied with all its parts.
Pay attention to the stove's tendency to oscillate.
Avoid sudden movements and sharp tugs when
lifting the stove.
Make sure the lifting capacity of the lift truck is
more than the weight of the stove. The person
manoeuvring the lifting means is held completely
responsible for lifting loads.
Do not let children play with the packaging materials

4 TYPE OF FUEL

Cookers are to be fed preferably with mature
beech or birch wood or with wood briquettes.
Each type of wood has different characteristics
It is forbidden to burn: pieces of bark, wood
treated with varnish, pressed wood panels, coal,
plastic materials; in this case, the guarantee on
the appliance is no more valid.
Despite the User being responsible for verifying
the characteristics of the wood use, we must also
specify that:
as it contains high quantities of resin
IMPORTANT: burning wood types rich of
aromatic oils (e.g. eucalyptus, myrth, etc.) will
cause the rapid corrosion of the internal parts
of the appliance.
Note that any damage to the product or its
components due to elements outside of such
product is not covered by the warranty and
therefore no claims of this type can be made to the
manufacturer.
The declared nominal yield of the chimney is
obtained by burning the right quantity of wood,
making sure not to
chamber. The ideal length of the wood is provided
by the length of the log holder.
The ideal length of the pieces of wood is of around
33 cm, which must be placed horizontally and not
vertically.
Maximum allowable moisture content is 25%.
The reference standard for the fuel used is EN
14961-1 "Forest, plantation and other virgin wood".
24/68
overload the combustion
5 PREPARING
THE PLACE OF
INSTALLATION
The user is responsible for the work carried out
in the area where the stove is installed; the user
is likewise responsible for checking the various
installation solutions proposed.
The user must comply with all the local, national
and European rules and regulations.
capacity, it is advisable to use a load-distributing
plate of an appropriate size.
adequate carrying capacity
The stove assembly and disassembly operations
must be carried out by skilled technicians only.
Before starting the assembly or dismantling
phases of the machine, the installer must comply
with the safety precautions as established by law,
and in particular as regards:
A) he must not work in adverse conditions;
B) he must be in perfect psychophysical condition
to work and ensure that the individual and
personal accident prevention devices are
sound and in perfect working order;
C) he must wear accident prevention gloves;
D) he must wear safety shoes;
E) he must make sure that the area he is working
in for assembling/dismantling the stove is free
from obstacles.
cod. 00 477 3191 - 03/2016 - Royal - PN - Italy