Car and Driver MINIOPRO CDC-628 Manual De Usuario página 5

INSTALL THE MINIOPRO
Connect the included Adhesive Bracket to the
MINIOPRO to the inside surface of your windshield.
For optimal results, place the MINIOPRO near the
rear-view mirror, as shown in the diagram below.
Connect the USB Power Cable to the MINIOPRO
and the USB Car Charger, hiding the cable as seen
above to avoid blocking the driver's visibility.
The GPS is embedded into the USB Power
and with the adhesive sticker facing upwards.
When the vehicle starts up, the MINIOPRO will
start up as well and automatically begin recording.
3