Setup; Receive Mode - Silvercrest KH 2021 Instrucciones De Uso

Setup

• Unfold the telescopic aerial
• Push out the support
Then turn the telescopic aerial

Receive Mode

a) Switch appliance on/off
• To switch the appliance on, press on the ...
– button "FM ON"
– button "AM ON"
• The green LED "POWER"
switched on.
• To switch the appliance off, press the button "POWER OFF"
b) Adjusting the reception
• If you have switched the appliance on using the receiving mode button
»
"AM ON" , first of all select either the reception range MW (Medium
Wave) or SW 1-7 (Short Wave). For this, push the waveband selector
into the relevant position.
• Then search for the desired radio station by slowly turning the tuning
re-gulator "TUNING"
the frequency just received is shown digitally, together with the unit
"MHz" (Megahertz) or "kHz" (Kilohertz).
c) Adjust sound volume
• Set the desired volume level using the volume regulator "VOL"
d) Switching the display illumination on
• Hold the button "LIGHT"
illumination.
³
and draw it out to its full length.
if you wish to position the appliance at an angle.
³
to a slanted upward angle.
·
, if you wish to receive VHF transmissions.
»
, if you wish to receive MW or SW 1-7 transmissions.
²
glows for as long as the appliance is
until you have clear reception. In the display
pressed down to switch on the display
- 43 -
¶
.
¿
´
.