PRODUCT DESCRIPTION
1. On/off switch
2. Connection for the adapter
3.
Motor casing
4. Dust reservoir with filter
5. Stick
6. Knob for disconnecting the turbo brush
7. Turbo brush with LED lighting
8. Knob for disconnecting the stick
9. Knob for disconnecting the dust reservoir
10. Crack nozzle
11. Combination furniture nozzle
12. Adapter
13. Suspension bracket
PRIOR TO FIRST USE
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner and all
accessories from the packaging and remove all packaging material. Keep the packaging (plastic bags and cardboard) out
of reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred during
transport. Place the vacuum cleaner on a sturdy, dry and flat surface. Prior to using the vacuum cleaner for the very first time,
charge the battery for at least 5 hours on the adapter.
ASSEMBLY
MOUNTING AND REMOVING THE TURBO BRUSH
Hold the connection of the turbo brush in line with the connection of the stick and connect both parts in such a way that they
snap in place.
Press the knob on the tube to disconnect the turbo brush - fig. 1.
MOUNTING AND REMOVING THE STICK
Hold the connection of the stick in line with the connection of the vacuum cleaner and connect both parts in such a way that
they snap in place - fig. 2. Press the knob to disconnect the vacuum cleaner again.
CHARGING THE VACUUM CLEANER
Insert the connector of the adapter into the connection on the side of the vacuum cleaner - fig. 3.
Insert the adapter into the socket. Once the adapter is connected to a socket, the vacuum cleaner is being charged.
The indicator lighting switches on and turns blue LED by LED.
If the battery of the vacuum cleaner is totally empty, charging takes approximately 5 hours.
When the battery is fully charged, all LEDs light up blue continuously. In order to save power, the indicator lighting switches off
after 3 to 5 minutes, once the vacuum cleaner is fully charged.
Always remove the adapter from the socket once the battery is fully charged. It is normal for the adapter to become warm
when it is connected to the socket.
TIPS
• A fully charged battery has a usage time of approx. 40 minutes in normal mode and approx. 20 minutes in turbo mode.
• We recommend fully using up the battery at least once per month and then fully charging it. This is beneficial to the battery's
life span.
Warning! Never connect the appliance to the adapter with wet or damp hands.
Warning! Do not make contact with the rotating brush of the turbo brush when the vacuum cleaner is on.
Warning! Only use the originally provided charger to charge the vacuum cleaner. Other chargers could damage the appliance
and can even be dangerous.
EN - 15