SEYCHELLES
SAFETY
Installation of fans must follow regional standards and meet local Authorith regulations. A fully qualified and licensed
electrician lawfully MUST carry out installation. Means for disconnection must be incorporated in the fixed wiring in accor-
dance with wiring rules. Fan and light MUST be earthed. Bracket MUST be firmly attached to a solid structure i.e. concrete
ceiling, steel structure or timber frame, etc. and MUST be nailed between beams if the timber option is required. DO NOT
control operation of fan and light with any other remote control, as this will void warranty.
WARNING
The use of unauthorised controllers will void the warranty. DO NOT mix blades from one fan to another. All blades must be
replaced if damaged wall switch included is a single pole switch.
UNPACKING YOUR FAN
Carefully open the packaging. Remove items from Styrofoam inserts.
Remove motor housing and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam
inserts should this fan need to be returned for repairs. Check against parts inventory that all parts have been included.
BEFORE INSTALLATION
Unpack your fan and check the contents. You should have the following:
1
2
3
4
1
Hanging bracket (x1)
2
Canopy (x1)
3
Downrod (x1)
4
Coupling cover (x1)
5
Motor housing assembly (x1)
hofflights.com
INSTALLATION MANUAL
5
6
7
6
LED light kit (x1)
(need to purchase separately)
7
Bottom cover (x1)
8
Blades (x3)
9
Control system (x1 set)
IMH-100 v.01
9
10
Plastic anchors (x2)
Blades screws (x10)
Blades tablettings (x3)
Wood screws (x2)
Expansion screws (x2)
Balance kit (x1 set)
8
10
15