HQ AVSPLIT-30 Manual De Uso página 3

Connection Illustration:
DC Adaptor
Connecting and Operation:
How to connect the 1×2 HDMI splitter to your devices
1. Connect the HDMI cable from the HD source to the HDMI splitter input.
2. Connect the HDMI cables from your displays (monitor or projector) to the outputs of
the splitter.
3. Standard resolution of outputs set up:
The resolution of the fi rst device plugged into the splitter's output will be the default
resolution of the other output. (If two HDTV displays are connected to the splitter
before the power was turned on, the resolution will be set by the HDTV display which
is connected to the second output port.)
4. Plug the 12VDC power supply into the splitter.
5. Push the Power Button to turn on the splitter.
6. When connections are completed, the HDTV signal will be distributed to each HDTV
display.
7. For the best performance, you should re-start the splitter power to make sure the
splitter is working well in HDCP between DVD player and display devices, when the
HDMI cable was disconnected after use last time.
DVD player / Blu-ray
HDTV display
3
HDTV display