Inserting/changing
batteries
For use you require
R/LR03 (AAA), 1.5 V (included).
1. Open the battery compartment on
the rear side of the control module.
2. Insert the batteries as indicated
at the bottom of the battery
compartment. Pay attention to the
correct polarity (+/-).
3. Close the battery compartment
again.
Suggestions for changing the battery:
The batteries must be changed
when nothing is shown on the
display.
Only use the type of battery that is
speci ed in the "Technical data".
Always change all batteries at the
same time.
Dispose of old batteries in an
environmentally appropriate way
(see "Disposal").
34
2
batteries of type
BBQ 1903 roasting thermometer