Delete A Scene/Step In A Chase - TECshow NAVIGATOR 2 Manual De Usuario

8) Press and hold the PROGRAM button for 3 sec-
onds to exit programming mode.

Delete a Scene/Step in a Chase

1) Press and hold the PROGRAM button for 3 sec-
onds to enter programming mode.
2) Press the desired CHASE (1~6) button that con-
tains the scene to be deleted.
3) Press the TAPSYNC/DISPLAY button to switch
the LED display to steps.
4) Select the scene/step to be deleted using the
BANK UP/DOWN buttons.
5) Press AUTO/DEL button to delete the step/scene.
6) Press and hold PROGRAM button for 3 seconds
to exit.
Delete a Chase
1) Press and hold the PROGRAM button for 3 sec-
onds to enter programming mode.
2) Press the CHASE button (1~6) to be deleted.
3) Press and hold the AUTO DEL button and the
respective CHASE button then release to delete the
chase. All LED's will blink 3 times.
Delete all Chase Programs Caution!
This procedure will result in irrevocable loss of chase
step memory. The individual scenes and program
banks will be preserved. Press and hold the BANK
DOWN button and the AUTO DEL button while turn-
ing OFF the controller.
P. 11
English version | Tecshow Navigator 2