Technical Specifications; General Notes - STAMOS S-WIGMA 200 PRO Manual De Instrucciones

9. REGELMÄSSIGE PRÜFUNG DES GERÄTES
Prüfen Sie regelmäßig, ob Elemente des Gerätes
Beschädigungen aufweisen. Sollte dies der Fall sein, darf
das Gerät nicht mehr benutzt werden. Wenden Sie sich
umgehend an Ihren Verkäufer um Nachbesserungen
vorzunehmen.
Was tun im Problemfall?
Kontaktieren Sie Ihren Verkäufer und bereiten Sie folgende
Angaben vor:
• Rechnungs und Seriennummer (letztere finden Sie
auf dem Typenschild).
• ggf. ein Foto des defekten Teils.
• Ihr Servicemitarbeiter kann besser eingrenzen, worin
das Problem besteht, wenn Sie es so präzise wie
möglich beschreiben. Je detaillierter Ihre Angaben
sind, umso schneller kann Ihnen geholfen werden!
ACHTUNG: Öffnen Sie niemals das Gerät ohne
Rücksprache mit dem Kundenservice. Dies kann Ihren
Gewährleistungsanspruch beeinträchtigen!
DE
8
U S E R M A N U A L
The operation manual must be read carefully.
The product must be recycled.
Satisfies requirements of applicable safety
standards
Use full body protective clothes.
ATTENTION! Wear protective gloves.
Safety goggles must be worn.
Protective footwear must be worn.
ATTENTION! Hot surface may cause burns.
ATTENTION! Risk of fire or explosion.
ATTENTION! Harmful fumes, danger of
poisoning. Gases and vapours may be hazardous
to health. Welding gases and vapours are
released during welding. Inhaling these
substances may be hazardous to health.
Use a welding mask with appropriate filter
shading.
CAUTION! Harmful welding arc radiation.
Do not touch the parts that are under voltage/
power.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.

1. TECHNICAL SPECIFICATIONS

Parameter description Parameter value
Product name TIG Welder
Model S-WIG- S-WIG
MA 200 200
PRO IGBT
Voltage/Frequency [V~/Hz] 230/50
Rated input current [A} 16 (MMA)
15.7 (TIG)
No-load voltage [V] 59 (MMA/TIG)
MMA welding current [A] 10-180
TIG welding current [A] 10-200
Welding current at 20% duty 180 (MMA)
cycle [A])
Welding current at 35% duty 200 (TIG)
cycle [A]
Welding current at 60% duty 103 (MMA)
cycle [A]
152 (TIG)
Welding current at 100% duty 80 (MMA)
cycle [A]
118 (TIG)
EN
2. GENERAL DESCRIPTION
The user manual is designed to aid safe and troublefree
use. The product is designed and manufactured in
accordance with strict technical guidelines, using state of
the art technologies and components and in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THE
PRESENT USER MANUAL.
To extend the shelf life of the device and to ensure
trouble free operation, use it and perform maintenance
tasks in accordance with this user manual.
technical data and specifications in this user manual
are current. The manufacturer reserves the right to
make changes associated with quality improvements.
Taking into account technological progress and noise
reduction opportunities, the device was designed
to reduce noise emission risk to the minimum.
3. SAFETY OF USE
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or death.

3.1. GENERAL NOTES

• Take care of your own safety and the one of third parties
by reading and strictly following the instructions,
included in the operating manual of the device.
• Only qualified and skilled personnel can be allowed to
start, operate, maintain and repair the machine.
• The machine must never be operated contrary to its
intended purpose.
3.2. SECURITY GUIDELINES FOR
THAT CONSTITUTES A FIRE HAZARD
Preparation of the building and premises
for work that constitutes a fire
• removal of all flammable materials and waste from
rooms and premises where work will be carried out;
• moving any flammable objects and non-flammable
objects in flammable packages away to a safe distance;
• materials that cannot be removed must be
secured against e.g. welding spatter by covering
them with e.g. metal sheets, drywall,
• check if materials or flammable
in surrounding rooms require protection;
• seal with non-flammable materials
openings in installation, ventilation,
etc. located near the place of
• secure electric cables, gas or installation
pipes covered with flammable insulation
against welding spatter if they are within the
range of work that constitutes a fire hazard;
• check that the planned work will not be carried
out in rooms that were painted using flammable
substances or where other flammable substances
were used on the day of planned
SPARKS MAY CAUSE A FIRE
Sparks produced by welding can cause fires, explosions
and burns on exposed skin. During welding, it is necessary
to wear welding gloves and protective clothing. Remove or
secure any flammable materials and substances from the
place of work. Do not weld sealed containers or tanks in
which flammable liquids were stored.
9
The
WORK
hazard:
etc.;
objects
any
work;
work.