Indel B TB Steel Serie Instrucciones De Uso página 23

TB STEEL SINGLE DOOR
STARTING AND OPERATING
DC CONNECTION
The unit is equipped with an electronic control system that will prevent polarity reversal. In the event that
the battery connection is reversed the unit will not start or operate.
The power inlet socket is fitted with a 15A fuse for protection.
Plug the 12/24V connection cable into the DC voltage socket on the rear and then connect to the cigarette
lighter or a suitable 12V or 24V power source.
AC CONNECTION
The unit is equipped with a multi-voltage power supply with priority circuit for connecting to an AC voltage
source of 100–240V. The power supply automatically switches to mains operation, if the device is connected
to a 100–240V AC mains, even if the 12/24V connection cable is still attached.
The power inlet socket is fitted with a 15A fuse for protection.
Plug the 100–240V connection cable into the AC voltage socket on the rear and then connect to a suitable
100–240V AC voltage.
POWERING ON
Connect to the desired input voltage and press the
current internal cabinet temperature.
TB STEEL SINGLE DOOR_27-04-2018
DC Power Cable
AC Power Cable
button to turn the unit on, the display will show the
ON
OFF
RUN
TEMPERATURE
HIGH
MID
ON
SET
OFF
LOW
BATTERY PROTECTION COMPRESSOR SPEED
MAX
SET
MIN
ENGLISH
21