Beper BF.640 Manual De Instrucciones página 11

EN
Multifunctional Oven Use instructions
OPERATING Fig.2
CAUTION : Ensure the lid is properly placed on the container before each use in order to avoid heat dispersion,
which can lengthen cooking time.
1. Place the low or high cooking rack into the glass container and put the food to be cooked inside (leave at least
7,5 cm of distance between food and lid).
2. Place the lid on top of the glass container and plug the oven into a socket.
3. Gently pull the safety device toward your right and push down the handle.
4. Set the desired cooking time by using the timer. The timer indicator will glow in red and the oven will start to
operate.
5. Set the desired cooking temperature by using the thermostat. The thermostat indicator will turn on and will
glow in red colour till the set temperature is reached.
6. Once the set cooking time has passed, the oven will automatically turn off.
NOTE : It is possible to stop cooking process at any time by lifting up the handle. Push down the handle again
to continue cooking process.
CAUTION : Always lift up the handle and unplug the appliance from the mains, before removing the lid form the
glass container.
It is possible to increase the height of the glass container by using the extension ring. Place it on the top of the
glass bowl as indicated on figure 2
CLEANING
Clean the oven after each use.
Glass container:
1. Put approximately 5 cm of water into the glass bowl with some drops of washing-up liquid.
2. Place used cooking racks inside the glass bowl.
3. Place the lid on the top of the glass bowl and plug the oven into a socket.
4. Set the thermostat to 200°C and select an operating time of 15 minutes by using the timer knob.
5. When the set operating time has passed, unplug the appliance and let the oven cool down.
6. Remove the lid and rinse the glass bowl under running water. Remove possible deposits by using a slightly
abrasive cloth.
Lid:
1. The glass of the lid may be cleaned with a soft damp cloth and some mild detergent. Rinse it out only by using
a soft damp cloth, and then dry it thoroughly.
2. It is possible to remove the metallic filter by releasing the three screws situated under the lid.Always unplug
the appliance from the mains and wait for the appliance to cool down completely, before removing the metallic
filter from the lid.
CAUTION : do not let water enter the ventilation openings or interior of the lid.
The outer surface of the glass lid should only be wiped with a soft damp cloth. Accessories may be cleaned with
mild washing detergent and water. After cleaning, dry all parts thoroughly before using them again. Do not use
harsh cleaning solutions.
WARNING : In case inner parts of the appliance comes into contact with water or other liquids, do not switch it
on and do not attempt to open it or to perform repairs yourself. Please refer to your nearest authorized seller, or
contact the Technical Assistance Service number to ask for an Authorized Assistance Centre.
BEFORE CALLING THE CUSTOMER SERVICE
1. In case the oven doesn't work
a) Make sure the plug is correctly inserted into the socket.
b) Check you have push down the handle.
c) Check the power cord isn't damaged or burned.
d) Make sure you have set thermostat and timer.
2. In case the oven doesn't warm up:
a) Make sure you have set the thermostat to the desired temperature
11