Location Of Controls - Mx Onda MX-RDM5240 Manual De Instrucciones

When there is a possibility of electrical storm, it is convenient to unplug the
power cord from the network.
If water or other liquid enters the appliance, disconnect the power cord
from the outlet and contact your dealer.
To unplug the mains cable, gently pull the mains plug. Never do it by
pulling on the cable.
If the appliance has been dropped or if it does not work properly, if the
cord, plug or other parts are damaged, refrain from using it and do not
attempt to disassemble or repair it. Contact your nearest MX ONDA
Technical Service Center or distributor.

LOCATION OF CONTROLS

1. LCD screen
2. Band selector
3. Tuning control
4. Setting the hours
5. Volume control
6. Setting the time
7. Setting the alarm
8. Setting the minutes
INDICATIONS ON SCREEN
1. Frequency on the FM band
2. Frequency in the MW band
3. Indication of frequency and time
4. Alarm activated
5. Alarm time indication
6. Indication after noon
7. MW band and indication before noon (AM)
8. FM band
9. Activation / deactivation of the alarm
10. Transport handle
11. Telescopic antenna
12. Switch on / off
13. Headphone output
14. Network power connector
15. Battery compartment cover
3