Safety Precautions - König Electronic KN-STUDIO70 Manual De Uso

Power Adjustment
Modeling Lamp
Colour Temperature
Triggering Methods
Triggering Voltage
Synch Distance
Voltage Range
Flash Tube
Weight
Caution
• Even unplugged, the unit maintains considerable internal voltage. There are no user serviceable parts
inside. Do not disassemble! Refer to an authorized service centre for any repairs.
• Do not exceed 75 Watts modeling lamp. The excess heat can damage the unit.
• Do not use a snoot with these units. The heat can damage the flash housing.
• Do not touch the bulb when it is hot!
• When not in use, disconnect from the power supply.
• Avoid sudden impacts as this can damage the flash tube and/or modeling lamp!

Safety precautions:

Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
1/8th to Full Power
Adjustable
On/Off Switch
Tracking
Daylight 5500 Kelvin
+/-100 Kelvin
Synch Cord
Test Button
Internal Photo Cell
5 V DC
Up to 36 ft
220-240 V AC 50/60 Hz
User Replaceable
1.5 lbs
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
3