Remote Control - dirna Bergstrom Bycool green line compact 2.0 Manual Del Usuario

COMPACT 2.0
EN

Remote control

Remote control functions:
1
Unit on/off.
Note: Pressing this button turns the unit on
in automatic mode F4
2
Control of blower speeds, up and down (only in F0 , manual mode).
Note: if the unit is on in F4 , automatic mode and the
the user presses this key, the unit will move into
manual mode F0 . The user can therefore choose the required
airflow by pressing this key, with the display showing
lthe abbreviations V1, V2, V3, V4, V5, V4, V3, V2, u1
3
Temperature control.
Comfort temperature can be controlled by pressing the keys + / - (15 /27 ºC or
59/80 º F).
Activate remote control:
To record the remote control, keep the
with the unit off. The display will flash
key on the control within 30 seconds and the unit will give out an acoustic signal as
confirmation. If this does not happen, repeat the whole operation.
Remove the remote control
To remove the remote control, keep the
until the display flashes
panel before 30 seconds have passed or it will be necessary to repeat the complete
operation.
C
. When it stops flashing, press the On/Off
C
, when it stops flashing, press the
10
Air conditioning for vehicles
key of the control panel pressed down
key of the control panel pressed down
1
3
2
key on the