Publicidad
Idiomas disponibles
Idiomas disponibles
FRAME RATE
QUALITY
SC CARD OPTIONS
FORMAT
SYSTEM STATUS
FACTORY DEFAULT
•
Mount the camera in the desired location. Check on a regular basis
whether the SD card is full or not. Refer to the table below for an
indication of the recording times.
Memory 1GB (not incl.)
frame rate/resolution
•
To start manual recording, press the record button [4]. The record LED [3]
lights up. To stop, press the record button [4] again.
•
To start playing back the recorded files in sequence, press the play button [6].
The play LED [5] lights up. To enter pause mode, press the play button [6]
again. To stop play-back, press the stop button [4].
•
forward [8] and reverse [9] buttons to for fast forward and fast
Use the
reverse play-back. When in pause-mode, press and hold the step forward
[8] or step reverse [9] button to move forward or backward 1 frame at a
time.
8. Batteries
•
Move the power on/off switch [A] to the off-position.
•
Open the battery compartment [J] by sliding the battery cover down.
•
Insert 4 new AA-batteries in the battery compartment following the
polarity indications inside the compartment.
•
Slide the battery cover back in place.
•
Remove the batteries when the device is not in use.
•
Do not throw batteries in fire as they may explode.
WARNING: handle batteries with care, observe warnings on
battery casing. Dispose of batteries in accordance with local
regulations. Keep batteries away from children.
14/01/2009
CAMCOLVC1
Select frame rate:
320x240: 1~30FPS / 640x480: 1~12FPS
Set quality:
LOW – MEDIUM - HIGH
shows overview, total space and remain space
WARNING!
DATA ON SD CARD WILL BE CLEARNED?
NO: EXIT YES:+
shows system version and overview of current
settings
RECALL DEFAULT NOW?
NO: EXIT YES:+
Note that day and time are not reset.
quality
30fps / 352 x 240
12fps / 640 x 480
7
low
medium
1100min
540min
800min
480min
©Velleman
high
440min
250min
®
Components nv
Publicidad
