Werner T340018 Para El Usuario página 5

Step 3
Deployment:
Once the rescue ladder system is anchored drop
the bag to deploy the Rescue Ladder. Avoid hitting
the fall victim while deploying the ladder.
WORK SURFACE
*FOR EASE OF USE: Have victim
climb in direct line of rope grab.
Step 4
Recovery:
Instruct fall victim to attach the rope end carabiner
to the D-ring of their harness. Do not remove
original fall protection restraint. Once the fall
victim is on the ladder, rescuer must remove excess
slack by pulling rope through the rope grab device.
Do not attempt to hoist the fall victim but always
keep rope taught as worker climbs the Rescue
WORK SURFACE
Ladder.
*TO PREVENT HIGH IMPACT
SECONDARY FALL: Continuously
remove slack as victim climbs rope
ladder
Page 5