cecotec Bamba SkinCare Manual De Instrucciones página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
reaction and should quickly disappear, but may be stronger when
you are removing hair at the root for the first few times or if you have
sensitive skin.
HOW TO USE THE ELECTRIC EPILATOR
1.
Connect the cord to the power supply and then to the device.
2.
Fully charge the device for 80 minutes.
3.
Remove the protection cover.
4.
Turn the device on and select speed:
a.
I: Fine hair
b.
II: Coarse hair
5.
Hold the appliance at an angle of 90º to
the surface where hair is to be removed.
Arms and legs:
Always work with both hands. Carefully stretch the skin with one
hand while moving the appliance with the other. Only move your
hair remover against the direction of the growth of your hair. Do
not use circular or back-and-forth motions.
Slowly move the electric epilator, while pressing down lightly. Do
not press the appliance down too hard against your skin; it might
slow down and be less effective.
Underarms and bikini line:
Recommendation: This zone is especially sensible, therefore it is
recommended to use speed I.
If hair is long (longer than 1 cm), it is suggested to cut it before
using the device, preferably at speed I.
Before operating the device in this area, clean it thoroughly to
remove any residual rest such as deodorant. Then, dry it with a
towel.
Move the appliance using an upwards motion.
EN
19

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido