Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
row to prevent the iron from cooling.
SPRAYING
•
La función de espray se puede utilizar a cualquier temperatura durante planchado con
vapor o en seco siempre que el depósito de agua esté lleno.
SELF CLEANING
•
Make sure the appliance is unplugged.
•
Set the steam knob to "0".
•
Fill the water tank up to the maximum mark and close it.
•
Set the temperature knob to maximum.
•
Connect the appliance to the power supply.
•
Unplug the appliance when it reaches the temperature.
•
Holding the iron horizontally, turn the steam controller to the maximum position and press
the self-cleaning button.
•
Boiling water and steam will be ejected from the soleplate's holes, taking out all impurities.
•
Repeat this process if considered necessary.
Tip: carry out the self-cleaning cycle once every 2 weeks. When excessive limescale is observed,
carry it out more frequently.
AUTO-OFF FUNCTION
The iron will automatically turn off when it is placed and kept still horizontally 25 seconds, or
vertically 8 minutes. The device will produce 6 beeps and the LCD display will light up in red,
indicating that the appliance has been turned off.
To heat it up again:
1.
Lift or gently move the iron.
2.
The LCD display will turn blue indicating that it is ready to be used.
ANTI-DRIP FUNCTION
•
This function automatically prevents water from spilling when the appliance is not hot
enough.
•
During use, the anti-drip system may emit a loud clicking sound, especially during
preheating or whilst cooling down. This is perfectly normal and indicates that the system
is functioning correctly.
16
3D FORCEANODIZED 750 SMART
Publicidad
