cecotec Total Iron 7000 SteamPro Manual De Instrucciones página 20

ENGLISH
Water spray button
Press the water spray button to activate the water spray function. The spray nozzle will spray
water mist and wet the clothes that need to be ironed. Release the water spray button to stop
the function.
Clean indicator
The appliance needs to be cleaned when the clean indicator lights up and remains on. It will
blink when the appliance is being cleaned.
Clean button
Before activating the clean function, make sure the temperature dial is turned to the Max.
setting and that the device is set to the steam mode. Press the steam trigger once for the water
spray button to return to its original position.
The appliance must be cleaned when the clean indicator turns steady on. Before cleaning,
prepare a container with a capacity of more than 300 ml for collecting the waste water.
Hold and press the "Clean button" for 2 seconds. When the buzzer sounds, the appliance will
enter into the cleaning mode and the clean indicator will blink. The cleaning process will last
for 3 minutes.
When the clean indicator turns off, if the user needs to perform another cleaning, hold and
press the clean button for 5 seconds. When the buzzer sounds, the appliance will enter the
cleaning mode and the clean indicator will blink. After about 3 minutes, the cleaning process
will be completed.
Cord winding groove
When not in use, the steam supply hose and power cord can be wound along the cord winding
groove for storage.
Fig. 5.
Note: The appliance will shut off automatically if all the indicators start blinking after being
powered on, indicating the appliance has malfunctioned. Stop using the appliance and contact
the Technical Support Service of Cecotec if this happens.
Dry ironing
Place the iron on the thermal insulation stand of the unit base.
Connect the plug to a wall outlet, the temperature indicator and the indicator of MAX. steam
rate will turn on.
Turn temperature dial to select the desired temperature setting depending on the garment's
fabric, the iron wills start heating up.
When the selected temperature is reached, the temperature indicator will turn off. Then, you
can start ironing.
20
TOTAL IRON 7000 STEAMPRO / STEAMPRO TOTAL IRON 7200 TITAN / TOTAL IRON 7500 TURBOSLIM
05500_05503_05504_Total Iron 7000_7200_7500_Manual_YV01191106.indd 20 6/11/19 17:06