Cleaning And Maintenance - SOLAC H101 Instrucciones De Uso

3.- Cleaning brush
4.- Lint chamber
5.- Battery compartment (batteries not included)
6.- Transformer
7.- Transformer connector
USER INSTRUCTIONS
• If using the unit with the transformer, insert the transformer jack
(6) into the matching connector (7).
• If using batteries to power the unit, open the battery compartment
(5) by pressing the lid and sliding it upwards.
• Insert 2 LR14 batteries with the poles as indicated
• Close the battery compartment by pressing on the lid and sliding
it downwards.
• Select the closeness level using the closeness level selector (2).
• Turn the ON/OFF switch (1) to the ON position.
• Place the garment on a smooth surface. Without pressing, gently
glide the fabric shaver over the stretched garment, changing the
closeness selector (2) as required.
• After use, turn the fabric shaver off by turning the switch (1) to the
OFF position and, if applicable, unplug the appliance from the
mains.
• After use, and once you have unplugged the appliance from the
mains, we recommend emptying the lint chamber (4)

CLEANING AND MAINTENANCE

• Before cleaning the fabric shaver, make sure it is switched off and,
if applicable, unplugged from the mains.
• Remove the lint chamber (4) by sliding it downwards, and empty
it. The lint chamber must not fill up more than
• To clean the shaving head, remove the closeness adjustment ring
(2), sliding it outwards until it comes free from the unit; remove the
shield's plastic casing using a flat-edged tool and carefully remove
the lint using the supplied brush (3) taking care not to damage the
shaving head.
• Clean the plastic casing with a dry cloth.
• Return the blade and the plastic casing to their original positions.
3
/ of the way.
4
9