Regular Maintenance - Weelko UV-DRY WKM008 Manual De Instrucciones

CONTENT
Please check that there are no missing
parts when you receive the parcel:
-UV nail dryer
INSTALATION AND OPERA-
TION
1. Plug the device into a wall socket
and place it on a flat and ventilated sur-
face.
2. At first use, the device can emit
a strong odor. It should disappear after
a few minutes. This is normal with new
devices.
3. Turn the rear switch on.
4. Place the patient's hands inside
the drier and the light will turn on.
5. If the 300 second-timer is activa-
ted, the device will automatically switch
off after this time.
6. The UV fluorescent lamps of the
nail drier help dry the nail polish and
give a better finishing. Suitable for per-
manent and semi-permanent nail polish
and gel nails.
7. Fan is not provided.
Importer: Weelko Barcelona, S.L.
© 2020 Weelko
www.weelko.com
ESB65397556
EN
CAUTIONS
1. Please make sure not to touch the
UV fluorescent lamps when placing your
hands inside the device. Keep hands in
contact with the metal plates only.
2. Hands must be placed correctly to
be detected by the sensors and to turn
the UV lamp on.
3. Do not use this device to dry in-
flammable products, such as nail polish
removers.
4. Turn the device off after each use
and unplug it from the wall socket.
5. Keep the power cord away from
fire or potential danger zones.
6. Keep the device out of reach of
children to avoid accidents or injuries.
Store the device correctly after each use.
7. If the device is not working proper-
ly, do not use it and contact your distri-
butor.

REGULAR MAINTENANCE

 Clean the device with a soft dry
cloth. Do not use damp cloths to avoid
damaging the surface of the device.
 To replace the UV fluorescent
lamps, switch off the device and replace
the fluorescent lamp very carefully.
TECHNICAL SHEET
RATED VOLTAGE
FREQUENCY
RATED POWER
PACKING SIZE
WEIGHT
WORKING TEMPERA-
TURE
UV LIGHT
220VAC-240VAC
50HZ/60HZ
36W
22x23x11,50
0,9 KG
25ºC
4 pcs of 9W fluo-
rescents