Umx-02/0 Firmware Upgrade Through Front Db-9 Connector - Optimus UMX-02/0 Manual De Instrucciones

ENGLISH

4.4.2. UMX-02/0 Firmware upgrade through front DB-9 connector

1. Switch off the power supply of the UMX-02/0.
2. Place the
DOWNLOAD MODE position.
3. Connect the RS232 cable between the computer
and the UMX-02/0 front DB-9 connector (Fig.
10).
4. Switch ON the the UMX-02/0.
The Front LCD of the UMX-02/0 is disabled
and will only show black characters in aleatory
positions.
5. Run the
BASIC software.
Eng
6. Open the Options menu. Enable the option AutoDisconnect
and select New Settings.
7. Select the project you want to use UMX_H8_3064.AWS
or UMX_H8_3068.AWS (depending on the type of micro-
controller that is inside the UMX-02/0) and click on Next.
54
UMX-02/0
front dipswitch in
FLASH DEVELOPMENT TOOLKIT
RX
TX
RS-485
OUT
RS-485
IN
UMX-02/0
FIRMWARE
DIPSWITCH CONFIGURATION
NORMAL MODE
RS232 CONFIGURATION
FIRMWARE DOWNLOAD MODE
Figure 13
24V
V 10.1
UMX-02/0
H8/3068
Fuse
3A
OFF
ON
Figure 14
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
Figure 12
UMX-02/0 v1.0