Perel CCTVSET10 Manual Del Usuario página 14

3) Under SMTP PORT, enter the SMTP port of your email server.
4) Under SMTP, enter the SMTP address of your email server. For example, smtp.gmail.com
5) Under SEND EMAIL, enter the sender email address.
6) Under SEND PW, enter the password of your email server.
7) Under RECV EMAIL, enter the email address that will receive the email notification.
8) Click APPLY. Click SURE in the confirmation window.
9) Click EXIT in all menus until all windows are closed.
7.3.5.2 INFO
View system information, including the firmware version, MAC address, and serial number of the
system.
7.3.5.3 MD (MOTION DETECT)
Configure motion detection for each channel.
To configure motion detection:
• Under STATUS, select ON to enable motion detection for the desired channel. Click NEXT PAGE
for additional channels (8-channel models only).
• Under SENSITIVITY, select 1, 2, 3, or 4. The higher the number, the more sensitive the motion
detection.
• Under MD SETUP, click SETUP. The red motion grid appears over the selected channel in full
screen.
• Click the blocks in the grid to enable/disable motion detection. Red=motion detection enabled;
Clear=motion detection disabled.
• Right-click anywhere on the screen to return to the Motion Detection menu.
• Click APPLY. Click SURE in the confirmation window.
• Click EXIT in all menus until all windows are closed.
NOTE: You can disable the MD buzzer in the alarm setup menu.
26/05/2011
CCTVSET10
14
©Velleman nv