User Instructions - König SEC-PH310 Manual De Uso

User instructions:

Operation
Operation indicator
When the system is installed and the 12V adapter is connected to the answering unit and
a wall socket, the red operation indicator will light up.
Doorbell
When a visitor presses the doorbell, the answer unit will play the doorbell tune and the
monitor will turn on automatically.The monitor stays on for about 20 seconds and then
shuts down automatically.
Monitor button
Switches the monitor on for a quick environment check.The monitor will show the
recording of the camera.
Alarm button
In case of an emergency, push the alarm button. The alarm sound will be given by the
doorbell loudspeaker.
Unlock button
Press the unlock button to unlock the door for the visitor. (only when an electronic lock is
installed)
Volume switch
Set the switch to the desired volume.
Menu setting
Press the monitor button to switch on the monitor in order toadjust the brightness, contrast, hue (colour)
and sharpness.
Press the menu button to open the menu.
Brightness:
Adjust the brightness of the image by pushing the + or – button. Press the menu button
again to go to the following adjustment.
Contrast:
Adjust the contrast of the image by pushing the + or – button. Press the menu button
again to go to the following adjustment.
Hue:
Adjust the hue of the image by pushing the + or – button. Press the menu button again to
go to the following adjustment.
Sharpness:
Adjust the sharpness of the image
Exit:
Exit the menu with the + or – button before the monitor is switched off, otherwise the
adjustments will not be saved.
Select the melody of the doorbell by pushing the melody button.There are 9 different
ringtones available.
6