Usage; Features; Long Life Tank; Hd Polyurethane Insulation Foam - Electrolux EYE030S1WE Manual De Instrucciones

8 www.electrolux.com

5. USAGE

5.1 Filling
This sealed unvented
(pressurised) appliance is
intended for heating
domestic hot water. The
appliance can supply one or
more draw-off points.
Once the water heater has been
installed:
1. Open the water source valve.
2. Open the hot tap.
When the water starts to run through it
with constant flow, then the water heater
will be full.

6. FEATURES

6.1 Long life tank

The tank is equipped with magnesium
anode to protect the tank against
corrosion.
6.2 Safety
The appliance is protected from over-
heating over-pressure with three types of
safety:
• Thermal fuse
• Relief valve
• Non return valve

7. CARE AND CLEANING

WARNING!
All the repair and
maintenance must be
carried out by customer
service authorized
technicians.
Regularly activate the safety
valve to prevent it from
becoming blocked, e.g. by
limescale deposits.
3. Close the hot taps
4. Make sure there are no leaks in the
installation.
5. Connect the appliance to the power
supply.
WARNING!
Do not connect the water
heater to the main power
supply without being sure
that it is full of water,
otherwise the heating
element may be damaged.
6.3 HD polyurethane insulation
foam
High-density polyurethane foam injected
between the inner tank and the outer
shell.
• To reduce power consumption.
• Keep heat loss controlled.
The material of the foam was chosen
carefully to give the best performance for
a long life.
Appliance malfunctions should be
repaired immediately to keep the
performance of it.
A clean soft cloth or wet sponge can be
used for the cleaning.
Dis-solvent products are not allowed for
the cleaning.