Care And Cleaning - VOX electronics TM-1013 Manual De Usuario

Note: 1) For each use, the consecutive operation time should not exceed 3 minutes. At
least 10 minutes rest time must be maintained between two continuous cycles, let the unit
cool to room temperature before performing the next operation cycle.
2) If you want to stop the machine during operation, turn
the knob to the O position anytime.
Fig.6
Important operating tips
·For best circulation of food to be blended with some liquid, pour the liquid into the jar first, then
add solids.
·Some of the tasks that cannot be performed efficiently with a blender are: beating egg whites,
whipping cream, mashing potatoes, grinding meat, mixing dough, and extracting juice from fruit
and vegetables.
·The following items should never be placed in the unit as they may cause damage: bones, large
pieces of solids, frozen food, or tough foods such as turnips.
·To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by
one through the lid opening.
Do not run the appliance for more than 3 minutes per time, and only wait until the unit
is cooled to room temperature before performing the next operation cycles.

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service
personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don't let food dry on the jar assembly
as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to the P position for a few seconds.
Then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit. To detach the blade
assembly, turn it clockwise from the jar base bottom, and remove the seal ring 2 and blade
assembly (see fig.8). In addition, detach the jar cover seal ring 1 from the jar cover.
Fig.8
Before blending, add
food to be blended
into the jar.
Fig.7
During blending, add the
ingredient through the lid
opening.