Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12

1. Safety Instructions

Please keep this User Manual for future reference.
Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
The unit should be connected to a main socket outlet with a protective earth connection
The unit is for indoor use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure that
no ventilation slots are blocked.
Disconnect mains power before fuse replacement or servicing.
Replace fuse only with the same type.
Make sure there are no inflammable materials close to the unit during operation.
Use safety cable when fixing this unit.
In the event of serious operating problem, stop using the unit immediately.
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
Do not touch any wires during operation as high voltage might be causing electric shock.
The product is for decorative purposes only and not suitable as a household room illumination.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
DO NOT LOOK DIRECTLY INTO THE LASER BEAM. This will damage your eyes.
DO NOT DIRECT THE LASER BEAM TOWARDS PEOPLE.
INSTALL THE UNIT IN SUCH A WAY THAT NOBODY CAN STARE INTO THE LASER BEAM.
2. Specifications
Power supply ................... 12Vdc 2A via supplied 100-240Vac 50/60Hz mains adaptor
Consumption......................................................................................................... 10W
Laser power ................................................................. Red : 100mW / Green : 30mW
Dimensions ....................................................................................130 x 130 x 220mm
Weight .................................................................................................................. 0.8kg
©Copyright LOTRONIC 2017
GB
TWIRLY-LZR
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

15-1236

Tabla de contenido