Dörr PBM-5000 Manual De Instrucciones página 8

PrODucT DescriPTiOn
the extremely slim Powerbank PbM-5000 is a powerful, portable usb 5V po-
wer source and an ideal reserve tank on the go.
equipped with a 5000mah lithium Polymer battery the Powerbank charges
all devices with usb or Micro usb port, such as smartphones, tablets, navi-
gation systems, MP3 players, cameras and more.
FeaTures
∙ high power lithium Polymer battery with 2 usb outputs:
usb 5V/1a and Micro usb 5V/2.1a
∙ build-in charging cables with usb and Micro usb plug
∙ short circuit protection, over-charging protection
∙ low self – discharge (when properly stored)
∙ automatic shutdown at the end of charging
∙ blue leds indicate capacity and charging status
∙ led light with torch function
∙ slim design and comfortable soft-touch surface
charGinG The POwerbanK (FiG. 1)
connect the dÖrr Powerbank to a Pc or laptop using the build-in usb
cable. While charging, the blue leds (5) are flashing. When all 4 blue leds
light up constantly, the charging process is terminated.
disconnect the Powerbank from power supply. the Powerbank is now
ready for use. alternatively the Powerbank can be charged via the Micro
usb port (3) using an optional Micro usb cable.
charGinG eXTernaL DeVices Via MicrO usb 5V/2.1a (FiG. 2)
connect the device you want to charge (e.g. your smartphone) with the
Powerbank using the build-in Micro usb cable. Press the power button (1)
to start charging. after charging is completed, unplug the Micro usb cable
and turn off the Powerbank. if Powerbank is not connected with any device
it switches off automatically after 25 seconds.
charGinG eXTernaL DeVices Via usb 5V/1a (FiG. 3)
connect the device you want to charge using the usb cable of your
device and connect it with the usb port (2) of the Powerbank. Press the
power button (1) to start charging. smartphones or other devices with a
charging current over 1a (1000mah) must use their OriGinaL usb cable
for charging.
POwer caPaciTY checK anD TOrch FuncTiOn (FiG. 4)
Press the power button (1) once. the blue leds (5) indicate remaining power.
Press the power button (1) twice in quick succession and the led light (4)
turns on. to turn off the light press the power button (1) twice in quick suc-
cession again.
8