Cleaning & Care - Silvercrest KH 700 Instrucciones De Uso

• When you have finished,
switch off the blender and re-
move the blender jug 4 by
turning it clockwise.
• Remove the blender lid 2
from the blender jug 4 by
turning it clockwise.
Hints:
• You can add your ingredients to the blender jug
4 through the opening in the lid 2 during ope-
ration. To do so, simply remove the splash protec-
tion cap 1.
• If you process hot liquids, remove the splash
protection cap 1 to allow the steam to escape.
• Should ingredients be trapped in the blender jug
4 during operation, proceed as follows:
- Switch off the device (speed controller 7 to le-
vel 0) and pull the plug from the socket.
- Remove the splash protection cap 1 and the
lid 2.
- Remove the trapped ingredients in the blender
jug 4 using the spatula o. Ensure you do not
damage the spatula o with the blade z!
9. Cleaning & Care
Caution:
Never immerse the device in water or other
liquids. There could be potential hazard of
life-threatening electric shock, if moisture en-
ters the voltage conducting parts upon opera-
ting the appliance again.
• Exercise special care when cleaning the blades
z, the blender jug 4 with installed blade and
the cutting discs (I-VI). The blades and cutting ed-
ges are extremely sharp! Risk of injury!
• Wipe the housing with a clean, damp cloth after
each use.
Warning regarding appliance
damage:
NONE of the appliance components are designed
for cleaning in a dishwashing machine! Additional-
ly, do not use abrasive cleansers for cleaning appli-
ance components.
• You can clean the mixing bowl 9 and the lid 0
in hot soapy water.
• Always remove the plug from the socket before
cleaning the appliance. Otherwise, you are at
risk of receiving an electric shock!
• Clean all appliance components that have come
in contact with foodstuff with detergent and hot
water after use.
• Use an appropriate dishwashing brush for places
that are difficult to access.
- 44 -