Peruzzo PARMA E-BIKE Instrucciones De Montaje página 10

- Before leaving, check that the rear lights function correctly. Also check
that the indicator lights work correctly.
- Keep the connections clean (lighting board power plug and power
outlet on the vehicle ); use suitable cleaning materials when necessary.
- Do not use and/or attach the bike rack to the car before making the
electrical connections.
- Check that the electrical cables are not damaged or likely to be
damaged by interference with other elements of the vehicle or that they
could, in any way, be accidently cut.
- The lighting devices are not designed t be immersed in water.
- Any major work required to be done on the electrical system and
connections must be performed by qualified personnel.
- Provide an additional number plate to be attached to the towball bike
rack.
- Keep in mind that when driving a vehicle with a towball bike carrier the
rear load projection is different to the normal projection, therefore, take
care when reversing or parking as you need to consider the longer
length of the vehicle; also be aware that the weight of the bikes loaded
on the carrier alter the handling characteristics of the vehicle
particularly in crosswind conditions, on bends or when braking; When
on the road, respect the highway code speed limits and pay attention to
the road conditions to prevent jolts.
- If the driver's rear view is obstructed the vehicle must be equipped with
rearview mirrors to ensure safe driving.
- To avoid damage, if the boot lid is equipped with an automatic opening
function, use this function with care.
- The rear lights of the vehicle are partially or completely covered when
using the towball carrier which is why the model that you have
purchased is equipped with an extra light and numberplate system. The
necessary number and type of lights depend on the date of the vehicle's
first registration, as set out below:
REGISTRATION BEFORE
01.01.1987
It is not obligatory to use fog
lights or reversing lights on the
towball bike carrier.
Use of a 7 pin plug is permitted.
REGISTRATION AFTER
01.01.1991
All the lights of the towball bike
carrier must be operational. Fog
lights and reversing lights are
obligatory.
It is necessary to use a relay or
electric plug with a cutoff system
that ensures that the vehicle's
fog lights switch off
automatically when the towball
bike carrier is used and come on
as soon as the plug is removed
(Only a 13 pin plug complies
with this requirement).
707_PARMA E-BIKE_30/03/13
REGISTRATION BETWEEN
01.01.1987 AND 31.12.1990
It is not obligatory to use fog
lights but it is mandatory to use
the reversing lights of the
towball bike carrier.
Use of a 7 pin plug is permitted.
In the event of incompatibility
between socket and plug use
suitable adaptors that are
readily available on the market.
REGISTRATION AFTER
01.01.1998
The towball bike carrier must not
cover the third brake lights. The
third brake light must be visible
otherwise it must be repeated on
the towball bike carrier.
10/25
GB
- If the load protrudes more than 40 cm beyond the surface of the lights
of the towball bike carrier then a visual sign must be attached to it.
- Check all the bike rack fixing elements after a short while, then at
regular intervals.
- Check the distance between the bike rack, the bikes and the exhaust
pipe(s) to avoid heat damages.
- To increase road safety and to reduce fuel consumption, remove the bike
rack when not in use.
- Modifications to the bike rack and its components are not permitted.
Immediately replace any worn or damaged part using original spare
parts exclusively.
- The bike rack can be cleaned by using warm water and/or car shampoo.
Store the bike rack in dry conditions at moderate temperatures.
The manufacturer is not responsible for damage caused by
improper use of this product, nor for any objection made by the
competent authorities with regard to the highway code.
The manufacturer shall only be responsible for manufacturing
defects in the bike rack and accessory components.
THE TYPE APPROVAL CERTIFIATE CAN BE DOWNLOADED FROM THE
PRODUCT TECHNICAL DATA SHEET ON OUR WEB SITE
www.peruzzosrl.com
Copyright © 2012 Peruzzo Italy - MADE IN ITALY