USING THE
TOASTER
USING THE
DEFROST
BUTTON
USING THE
CANCEL BUTTON
operate the toaster without bread inside for at least 5 minutes.
Ensure there is plenty of ventilation in the room.
A short power-supply cord should be used to reduce the risk
resulting from becoming entangled in or tripping over a longer
cord.
Longer (detachable power-supply cords or) extension cords are
available and may be used if care is exercised in their use.
If an extension cord is used,
1) The marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance and
2) The longer cord should be arranged so that it will not drape
over the counter top or table top where it can be pulled on by
children or tripped over unintentionally.
Ensure control lever (D) is raised.
Plug (K) into a suitable mains supply socket.
Insert up to two slices of bread into toasting slots (E).
Turn the variable browning setting knob (A) dial to
required setting. (1=lightest, 5=darkest)
Press down control lever (D) until it locks.
Once the chosen level of browning has been reached, the toast
will automatically raise ready for removal from the slots.
If the first slices are not browned sufficiently, select a higher
setting (A) next time.
If you want to interrupt the toasting process, press the stop
button (C) at any time to stop the toasting process.
When using bread straight from the freezer set the browning
control to the required position and press down the control
lever (D) until it locks. Press within 2 sec. the defrost button (B).
The defrost light will remain on while the defrost function is in
use, and toasting time will be automatically extended. Always
keep an eye on the bread for any signs of burning.
Press the stop button (C) at any time to stop the toasting process.
9
EN