weasy IRO320 Manual De Instrucciones página 5

Danger of Fire
• Do not use the device in rooms containing easily ignitable
dust or poisonous and explosive fumes.
• Do not operate the device in the vicinity of combustible
materials.
• Do not connect the device along with other consumables
(with a high wattage) to a multiple socket in order to
prevent overloading and a possible short circuit (fire).
Avoiding Damage to Material, Property and the Device
• Always place the device with clear space above it and on
all sides on a dry, flat, solid and heat-resistant surface.
• Do not place the device under other electronic devices.
• The device must be switched off when inserting or
removing the main plug. Always pull the main plug and
never the main cable to disconnect the device from the
main power.
• Never cover up the ventilation slots and do not insert any
objects into them.
• Make sure that the main cable is not squashed, bent or
laid over sharp edges and does not come into contact
with hot surfaces.
• Make sure that the voltage rating on the type plate
corresponds to your main voltage of your installation. If
this is not the case, contact the dealer and do not
connect the unit
• Protect the device from heat, naked flames, extreme
temperatures, persistent moisture, wet conditions and
collisions.
• Do not use any corrosive or abrasive cleaning agents to
clean the device. These can damage the surface.