Maintenance And Care - KIKKA BOO PASTELLO Instrucciones De Uso

IV. HOW TO ADJUST THE HEIGHT OF THE CHAIR
1. Hold down the seat height adjustment button to reduce the seat height.
2. The seat can be raised by direct reverse pulling the seat, and the height of the seat can be adjusted in 8 les.
V. HOW TO ADJUST THE SOLID ANGLE
1. Press and hold down the pedal adjustment button, the foot angle can be adjusted in three les.
2. To adjust the pedal upward, the pedal can be pushed up directly, but the downward adjustment must be done by using the key
button.
VI. HOW TO LOCK THE FIVE-POINT SEAT BELT
1. When buckling your seat belt, please lock your waist into the separator and you will hear the "ticking" sound directly.
2. The shoulder strap on the seat belt has two heights to choose from. When adjusting the height, the shoulder strap is removed from
the back of the chair to the shoulder strap, and pulled out from the back of the chair and the seat. When installed, the shoulder strap is
inserted into the seat cushion and the slot on the back of the chair, respectively.
VII. THE BACK ANGLE ADJUSTMENT
1. Hold the back of the chair to adjust the handle, then apply force to the front and back. The angle of the back of the chair can be
adjusted according to the need, and the back of the chair can be adjusted from ve angles.
Warning: It is only used for babies over 6 months and weighs less than 20 kg. when the back of the chair is perpendicular. Force is then
applied in the forward direction to adjust the angle of the back of the chair as needed.
VIII. COMMON SENSE OF MAINTENANCE
1. Don't put the chair under the blazing sun for quite a long time.
2. No dry cleaning, no washing machine, no iron with cushion.
3. When the cushion is cleaned, please use the brush and other cleaning utensils directly to clean the stains. When cleaning other parts,
please clean with the neutral washing powder of soap
4. Please check the every parts of chair if loosen or damage.lf there is damaged of other parts,please stop using.
5. When disassembling and assembling, please follow the instructions carefully to avoid unnecessary damage
IX. MAINTENANCE AND CARE
• The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
• Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage
of the metal and plastic parts and fading of the fabrics of the crib.
• When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low
room temperatures.
From time to time check all plastic parts that are hanged on the frame. Tighten all screw and bolts if necessary.
• Cleaning the cushion: Unfasten the safety belt. Wash it with warm water and dry it to avoid exposure under high temperature.
• Do not use bleach and strong acid/base liquid for cleaning the chair frame. Avoid contact with water in hardware parts, as corrosion will
a ect the service.
ENGLISH