Wired Connection Via Ethernet - Palmer GAMK2 Manual De Usuario

WIRED CONNECTION VIA ETHERNET

To establish a wired connection, use your computer's Ethernet interface to directly connect to the Grand
Audition MK2's Ethernet interface with an Ethernet cable (min. CAT5e). Switch on the Grand Audition MK2.
In your computer's system settings under Properties of Internet Protocol Version 4 (TCP/IPv4), manually enter
the IP address 198.168.2.1 and the subnet mask 255.255.255.0 and then confirm the entered data (the val-
ues are entered in a similar manner in the different operating systems; see example figures provided below).
WINDOWS
MAC OS LINUX
These settings are required the first time the connection is set up because the Grand Audition MK2's IP
address and subnet mask are set by default to 192.168.2.99 and 255.255.255.0 and the value under IPv4
must be in the defined address space. The settings can be subsequently changed as required (see Grand
Audition Control App: DEVICES, Point 4 Network).
Enter the IP address 192.169.2.99 into your browser's address line and press ENTER ( ) to confirm. The Grand
Audition's control app will open and show the LOGIN window. Tip: Bookmark this address in your browser.
9