Electrical And Fire Safety - Braun Silk-expert PRO 3 Manual De Instrucciones

Precautions
• The device is intended for a single user.
• It is not intended for use by people under 18 years old.
• People with reduced physical, sensory or mental capabilities or lack of experience
and knowledge, may use the device if they have been given supervision or instruction
concerning the safe use of the device and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the device.
Always keep the device out of children's reach.

Electrical and fire safety

Regularly check the device and cords for visible signs of damage. In case of
damage or cracks, stop using the device. Electric shock may result from using a
damaged device. In case of defects, have the device checked and repaired by an
authorized service center. Unqualified repair work can lead to extreme hazards for
the user. Always unplug the device after use.
DANGER
Never attempt to repair and open the device, as this may expose you to dangerous
electrical components and to pulsed light energy, either of which may cause
serious bodily damage and/or permanent eye injury.
Do not use in or near water and wet surfaces such as bathtubs, showers,
basins or other vessels that may contain water. If the device becomes wet,
it should not be used. Electric shock may result from using a wet device.
Do not use if the device is damaged (e.g. cracked housing, cord damage etc).
Internal parts contain electric charges that are hazardous.
Do not use if the glass filter (9) is cracked or missing. Regularly inspect the glass
filter for damage.
Do not touch the glass filter during or directly after use since it will get hot.
Do not use petroleum-based or flammable cleaning agents (alcohol, acetones) on
the device as these pose a fire risk.
Do not use abrasive cleaning agents. These may damage the device or scratch the
glass filter.
Do not attempt to use this device other than for removing unwanted hair.
Do not use the device on a surface other than skin. Do not press the treatment
button when the treatment window (1) is not placed in full contact with the skin.
Do not block the cooling vents. The device may overheat and pose an electric
shock risk or fire hazard.
14