Optional Equipment - IKAR DB-AR Manual De Instrucciones

6. Anchorage point in accordance with
EN 795
The anchorage point (large eyelet) Item 3 (Fig. 11) is
suitable for anchoring the deployed subsystems of the
fall arrest shock absorbing device of the personal protec-
tive equipment e.g. in accordance with EN 354/355, EN
360 and a maximum of two IKAR deflection rollers for
IKAR-HRA devices in accordance with EN 1496.

7. Optional equipment:

IKAR HRA fall arrest device with rescue-lift-
ing equipment
The IKAR HRA fall arrest device with the
rescue-lifting equipment is secured to the
leg on which the type plate is affixed via the
mounting bracket.
To do so, attach the mounting bracket Item
6 (Fig. 12, 13 and 14) to the leg so that the
safety supervisor can operate the rescue
winch of the IKAR HRA device easily in the
event of a rescue. The correct clamping
tension of the mounting bracket is achieved
by the length (45.8 mm) of the spacer sleeves
(also supplied). The tightening torque of the
hexagon socket bolts of quality class 8.8 M
10x75 is 49 Nm. The locking bar should be
positioned according to the device size. The
tightening torque of the cylinder head screws
of quality class 8.8 M 8 x 40 is 20 Nm. Insert
the IKAR HRA device into the mounting
bracket. The IKAR HRA device is secured to
the mounting bracket via the socket pin
N.B.: Use IKAR mounting brackets only.
Only IKAR equipment should be attached
to IKAR mounting brackets.
Deflection roller with karabiner hook:
The deflection roller (Fig. 15+16) is used to
guide and deflect the steel rope of the IKAR
HRA fall arrest device.
Open the closed deflection roller (Fig. 15) by
twisting the two plates (Fig. 16) and insert the
steel rope into the guide groove. Then twist
the two plates back into their original closed
position.
Attach the snap hook to the deflection roller
and hook it into the anchorage point Item 3 of
the rescue tripod.
Caution: Use steel karabiner hooks that
comply with EN 362 Class B only.
Tighten the screw retention nut on the
karabiner hook. Check the pulley for ease of
movement
N.B.: The IKAR HRA device retracts the line
automatically if the rescue lifting function is not
engaged.
ENGLISH
Item 3
Fig. 12
HRA device
Fig. 14
Fig. 15
14
Fig. 11
Spacer sleeve
M 10 x 75
Item HRA 9.5/12
Item HRA 15/18
Item HRA 24/33/42
Locking bar
Fig. 16
Fig. 13
Item 6
M 8 x 40
Directions
Close
Open